FT-301系列智能粉末電阻率測試系統 （升級版）新品發布
更新時間：2017-09-14 點擊次數：6268
FT-301 Series inligent powder resistivity test system (upgrade)概述：采用一體化結構設計，將粉末比電阻的測量與粉體電阻率/電導率分析為一體式，測量與數據分析全部通過PC軟件完成，粉體壓強與電阻值、電阻率、電導率值的變化關系；粉體受到壓縮直至平穩時，描述了粉體在壓縮體積變化過程中，電性能的變化趨勢，采用全自動操作模式運行，自動數據分析與管理。四端法測量模式。Overview: the integration structure design, the powder ratio resistance measurements and powder resistivity/conductivity analysis for one-piece, measurement and data analysis was done by the PC software, The change relationship between the powder pressure and resistance, the resistivity and the conductivity; Powder is compressed until smooth, describes the changing trend of the electrical properties in the process of compression volume. Using automatic operation mode, automatic data analysis and management. Four terminal method of measurement.適用范圍：需要對電性能進行分析的導電性粉末，如：碳素粉末廠、焦化廠、石化廠、粉末冶金廠等生產加工企業部門；高等院校、科研部門，質量檢驗機構，質量管理部門，研發部門等。Scope of application: to analyze the electrical conductive powder, such as: carbon powder plant, coking plant, petrochemical plant, powder metallurgy factory etc production and processing enterprises sector; university, scientific research department, quality inspection organization, quality management department, r&d department, etc.規格型號/ modelFT-301AFT-301BFT-301CFT-301D1.電阻/ resistance1×10-8—2×105Ω10-7～2×107Ω10-6～2×106Ω10-5～2×106Ω2.電阻率范圍/ Resistivity1×10-8—2×105Ω-mm10-7～2×107Ω-cm10-6～2×106Ω-cm10-5～2×106Ω-cm3.電導率/ Conductivity5 ×10-5～1×108ms/cm5×10-7～107ms/cm5×10-6～106ms/cm5×10-6～105ms/cm4.測試電流范圍/ current0-10A，zui小100uA1μA，10μA，100µA，1mA，10mA，1000mA 5.測量電壓量程/ Voltage0-2v；分辨率： 0.1Uv精度0.1% 電壓量程/ voltage：2mV 分辨率/ 20mV 200mV 2V Resolution：0.1uV 測量精度±（0.1%）/、 Accuracy ± (0.1%)6.電流精度/ Current Accuracy±0.1%±0.1%±0.2%7.電阻精度/ Resistance Accuracy≤0.3%標準電阻/ standard resistance分辨率0.01μΩ≤0.3%標準電阻/ standard resistance分辨率0. 1μΩ8.PC軟件界面/display電阻值、電阻率、電導率值、溫度、壓強值、單位自動換算、橫截面、高度等resistance, resistivity, conductivity, temperature, pressure value, the unit automatically conversion, cross-section, height9.測試方式/Test mode四端測量法/Four-terminal measurement method10.傳感器壓力/Pressure Sensors200kg；(其他規格可以定制) / (Other specifications can be customized)11.粉末模具/Powder Mold模具：內徑10mm；高：25mm ；內徑20mm；高：25mm（選購）Mold: inner diameter 10mm, height: 25mm, inner diameter 20mm, height: 25mm (choose to buy)12.工作電源/power supply輸入: AC 220V±10% ,50Hz 功 耗：<60WInput: AC220V ± 10%, 50Hz Power consumption: <60W13. 主機外形尺寸/dimensions約H700mm*L650mm*D300mmAbout H700mm*L650mm*D300mm14.凈重量/Net Weight約45kgAbout 45kg15. 標配外選購/Others buy1.標準校準電阻1-5個；2.電腦和打印機依據客戶要求配置；4.計量證書1份1. Standard calibration resistor 1-5.2. computers and printers based on customer configuration requirements.3. Measurement certificate 1.
